- Products
- Support & Download
- Solutions
- Contacts
- About Brother
TC-32BN QT/FT Specifications
High-performance column traverse machine with
leading edge #30 machining capabilities and 40-tool
storage capacity to achieve high productivity
Machine specifications
item | TC-32BN QT | TC-32BN FT | ||||
---|---|---|---|---|---|---|
12,000min-1 specifications | 16,000min-1 specifications | 12,000min-1 specifications | 16,000min-1 specifications | |||
CNC unit model | CNC-B00 | CNC-B00 | ||||
Travels | X axis [mm(inch)] | 550 (21.7) | 550 (21.7) | |||
Y axis [mm(inch)] | 400 (15.7) | 400 (15.7) | ||||
Z axis [mm(inch)] | 415 (16.3) | 415 (16.3) | ||||
Distance between table top spindle nose end [mm(inch)] | 645 (25.4) | 645 (25.4) (standard),
865 (34.1) (low) |
||||
Table | Work area size [mm(inch)] | 600 x 425 (23.6 x 16.7) (one side) | 800 x 400 (31.5 x 15.7) | |||
Max. loading capacity (uniform load) [kg(lbs)] | 200 (441) (one side) | 600 (1323) | ||||
Max. turning diameter [mm(inch)] | 1,200 (47.2) | - | ||||
Table positioning time [sec.] | 3.4 / 180deg. | - | ||||
Table chage repeatability [mm(inch)] | 0.01 (0.0004) (table center) | - | ||||
Spindle | Spindle speed [min-1] | 12 - 12,000 | 16 - 16,000 | 12 - 12,000 | 16 - 16,000 | |
Speed during tapping [min-1] | MAX.8,000 | MAX.8,000 | ||||
Tapered hole | 7/24 tapered #30 *9 | 7/24 tapered #30 *9 | ||||
Feed rate | Rapid traverse rate X x Y x Z axes [m(inch)/min] | 70 x 70 x 70 (2,756 x 2,756 x 2,756) | 70 x 70 x 70 (2,756 x 2,756 x 2,756) | |||
Cutting traverse rate [mm(inch)/min] | 1 - 20,000 (0.04 - 787.4) | 1 - 20,000 (0.04 - 787.4) | ||||
ATC unit | Tool shank type | MAS-BT30*9 | MAS-BT30*9 | |||
Pull stud type*8 | MAS-P30T-2 *9 | MAS-P30T-2 *9 | ||||
Tool storage capacity [pcs.]*1 | 26(+1) / 40(+1) | 26(+1) / 40(+1) | ||||
Max. tool diameter [mm(inch)]*2 | 0 - 30 (0 - 1.2) / D46 (1.8) , 30 - 200 (1.2 - 7.9) / D55 (2.2) (Large tool D125 (4.9)) |
|||||
Max. tool length [mm(inch)] | 200 (7.9) | 200 (7.9) | ||||
Max. tool weight [kg(lbs)]*3 | 3.5 (7.7) | 3.5 (7.7) | ||||
Tool selection | Double arm method (random shortcut) | Double arm method (random shortcut) | ||||
Tool change | Tool To Tool: 0.9sec(BT)*10
Chip To Chip: 2.0sec(BT)*10 |
|||||
Electric motor | Main spindle motor (10 min / continuous) [kW]*4 | 11/ 6 | 10/ 7.3 | 11/ 6 | 10/ 7.3 | |
Feed spindle motor [kW] | 1.3 (X, Y, Z) | 1.3 (X, Y, Z) | ||||
Power source | Power supply | AC 3Φ, 50 / 60Hz 1Hz | AC 3Φ, 50 / 60Hz 1Hz | |||
Power capacity [kVA]*5 | 16 (Max. 32) | 18 (Max. 37) | 16 (Max. 32) | 18 (Max. 37) | ||
Air supply | Working air pressure | 0.4MPa - 0.6MPa | 0.4MPa - 0.6MPa | |||
Required flow*6 | 120 L/min (at atmospheric pressure) | 120 L/min (at atmospheric pressure) | ||||
Machining dimensions | Machine height [mm(inch)] | 2,360 (92.9) | 2,360 (92.9) | |||
Required floor space (with control unit door open)[mm(inch)] | 1,890 x 3,669 (74.4 x 144.4) | 1,890 x 3,103 (74.4 x 122.2) | ||||
Machine weight (including control unit splash guard)[kg(lbs)] | 4,600 (10,143) | 4,400 (9,702) | ||||
Accuracy*7 | Positioning accuracy [mm(inch)] | 0.005 / 300 (0.0002 / 11.8) | 0.005 / 300 (0.0002 / 11.8) | |||
Repeatability [mm(inch)] | ±0.003 ( ±0.00012) | ±0.003 ( ±0.00012) |
- *1 When all tools are small tools (D55mm or less).
- *2 The tool storage capacity, tool change time, etc., will vary when using large tools. The tool change time varies depending on the spindle type.
- *3 Actual tool weight varies according to the configuration and center of gravity; The figures shown here are for reference only.
- *4 Spindle motor output differs depending on the spindle speed.
- *5 These include 0.9 KVA for chip conveyor and 4.2 KVA for high-pressure coolant.
- *6 The required flow rate listed is the total flow rate when using the spindle air blast and coolant valve.
- *7 Measured in compliance with JIS B6201-1987.
- *8 Brother spec. is applied to pull stud for CTS.
- *9 Please contact Brother for details of HSK and NC5 types.
- *10 This is value of BT spec.
NC Unit specification
Model | CNC-B00 | |
---|---|---|
Control axes | 7 axes ( X, Y, Z, 4 additional axes) | |
Simultaneously controlled axes | Positioning | 5 axes ( X, Y, Z, A, B) |
Interpolation |
|
|
Least input increment | 0.001 mm, 0.0001 inch, 0.001 deg. | |
Max. programmable dimension | ±9999.999mm 999.9999inch | |
Display | 12.1-inch color LCD | |
Program capacity | Approx. 5,000 m (Approx. 2 Mbytes) | |
External communication | USB Interface, RS232C 1ch(9Pin), Ethernet | |
No.of registrable programs | 1,024 | |
Program format | NC language, conversation (changed by parameter), conversion from conversation program to NC language program available | |
NC function |
|
- * Functions with (NC) and (conv.) are available only for NC language programming and conversational programming respectively.
Please ask about an option.
Customer considering purchase
-
Catalog download
Guide of Compact machining center SPEEDIO catalog download.
-
Contacts-Product infomation
Contact for product information, development, or usage, and regional sales offices.
Support Information
-
Distributors- Repair contacts
Contact for product repair of maintenance.