Machine specifications
[Main Unit] [NC Unit] [Dielectric
fluid supply tank]
[B-axis index table (option)] [Other option]
| Main
unit |
| Item |
inch (mm) |
| Maximum workpiece dimensions |
22.8 x 15.3 x 6.7 (580 x 390 x 170) |
| Maximum workpice weight |
770lbs (350kg) |
| X and Y axis stroke |
16.1 x 10.2 (4110 x 260) |
| Z axis stroke |
6.7 (170) |
| Maximum machining speed |
28inch2/hour
(300mm2/min) |
| Optimum surface roughness |
0.01µinchRa (0.26µmRa) |
| Maximum table feed speed |
36inchi/min (900 mm/min) : positioning
12inchi/min (300 mm/min) : machining |
| Wire diameter |
0.004, 0.006, 0.008, 0.01, 0.012
(0.1, 0.15, 0.2, 0.25, 0.3) |
| Wire guide system |
Round diamond |
| Wire feed speed |
1.57 - 9.84inch/sec
(40 - 250mm/sec) |
| Wire tension |
3 - 25 N |
| Maximum wire spool |
DIN 160/ P10 (13.5lbs & 10kg) |
| Wire recovery method |
Mechanical cutting with rotating blade |
| Wire recovery bucket capacity |
44lbs (20kg) |
| U and V axis stroke |
±1.28 x ±1.28 (±3.25 x
±3.25 ) |
| Maximum taper angle |
Sharp corner taper, Cylindrical taper,
Conical taper, Independent U/V
4 axes programming |
| Dielectric fluid feed system |
Submerged type/ Flushing type |
| Main unit dimensions |
40.9 x 66.2 x 76.2 (1040 x 1681 x 1936) |
| Main unit weight |
3080lbs (1400kg) |
| Installation area |
86.2 x 99.4 (2190 x 2525)
Including maintenance area |
| Power supply |
3-phase AC V ±10% 50/60Hz ±1Hz |
| Total input |
13.5kVA
Includes dielectric fluid cooling system |
| NC
unit |
| Item |
inch (mm) |
| Controllable Axes |
X, Y, Z, U, V, B |
| Minimum setting unit |
0.0001 (0.001) |
| Minimum drive unit |
0.000004 (0.0001) |
| Maximum command value |
±999.99999 (±9999.999) |
| Interporation functins |
Linear, Arc |
| Positioning command functions |
Relative, Absolute |
| Input |
Keyboad, RS-232C, Ethernet |
| Display |
12.1" color LCD (SVGA) |
| Memory |
1,000,000inch (25,400m)
Number of programs 1000 |
| Operating modes |
Program, Back, Trace, Jog, Step,
Breakpoint return, Centering,
Edge find, Zero-point retum |
| NC-Functions |
Machine lock, Dry run, Single block,
Optional stop, Metric/ Inch select,
Stored stroke limit,Subprogram,
2D/3D (surface/ wire-frame) graphics,
Machining time display,
Correction of pitch error,
Automatic condition setting,
Servo feed & thickness corner contorol |
| Dielectric
fluid supply tank |
| Item |
inch (mm) |
| Dielectric tank supply |
360 L |
| Filter system |
2 internal pressure filters |
| Ion exchanger capacity |
7.5 L |
| External dimensions |
25.6 x 55.8 x 48.8 (650 x 1417 x 1240) |
| Weight (empty) |
473 lbs(215kg) |
| B-axis
index table (option) |
| Item |
inch (mm) |
| Setting unit |
0.00001 deg |
| Minimum movement unit |
0.00072 deg |
| Maximum rotation speed |
20 min-1 |
| Load weight |
18 lbs (8kg) |
| Other
option |
- Dielectric fluid cooler
- Vertical alignment guage
- Auxiliary base
- Wire guide (0.004 - 0.012)
- Rotation status lamp (single/ triple)
- I/O interface boad
- Manual pulse emitter
- lower cover
- Auxiliary power supply device
- Expansion memory (256Mbyte)
- Removable deta strage unit (FDD)
- Task light
|
|
|
