Machine specifications

TC-20A

[CNC model] [Movement amount] [Table] [Spindle] [Feed rate] [ATC]
[Motors] [Power source] [Machine dimensions] [Accuracy]
[Standard accessories]

25,000min-1 30,000min-1 CNC unit model Model CNC-A00 Movement amount X axis mm(inch) 200 (7.9) Y axis mm(inch) 185 (7.3) (+70(2.76)) Z axis mm(inch) 250 (9.8) Distance between table top and spindle nose end mm(inch) 120 - 370 (4.7 - 14.6) Table Work area size mm(inch) 400 x 200 (15.7 x 7.9) Max. loading capacity (uniform load) kg(lbs) 70 (154) Spindle Spindle speed min-1 25 - 25,000 30 - 30,000 Speed during tapping min-1 Max. 10,000 Tapered hole min-1 7/24 Tapered No.15 Feed rate Rapid feed rate X x Y x Z axes mm(inch)/min 40 x 40 x 45 (1576 x 1576 x 1773) Cutting feed rate mm(inch)/min 5 - 10,000 (0.2 - 394) ATC unit Tool shank type JBS4002 - 15T Pull stud type JBS4002 - 15P (45°) Special Tool storage capacity pcs. 15 (Max. tools to be used: 16) Distance from taper gauge line (Max. diameter) mm(inch) 0 - 100 / D 30 Max. tool weight*-1 kg 0.4 / tool (total weight: 3.0) Tool selection Double arm (memory random) Tool change time (T to T) (sec) 0.8 (C to C) (sec) 1.6 Motors Spindle motor (30min / Cont.)*-2 (kw) 2.8/ 2.6 3.1/ 2.9 Feed shaft motor (kw) 0.3 (X, Y) / 0.5 (Z) Power source Power supply AC 200V ±10% 50 / 60 Hz ±1Hz Power capacity (Max.) (kVA) 5.3 (26) 5.8 (26) Pneumatic source Working air Pressure (MPa) 0.4 - 0.6 (4 - 6kg.f/cm2) Flow rate*-3 (L/min) 70 Machine dimensions Model Height mm(inch) 2,031 Flow rate space (with control unit door opend) mm(inch) 957 x 2,321 Flow rate space (with control unit door opend) kg(lbs) 1,200 Accuracy *-4 Positioning accuracy mm(inch) 0.005 / full stroke Repeatability mm(inch) ±0.002 Standard accessories 1 operating manual, 4 anchor bolts, 4 leveling plates, 1 splash guard with manual door, 1 set of fuses.

*-1:	Actual tool weight varies according to the configuration and center of gravity; the figuress shown here are for referrence only.
*-2:	Spindle motor output differs depending on the spindle speed.
*-3:	The required flow rate listed is the total flow rate when using the spindle air blast and coolant valve.
*-4:	Measured in compliace with JIS B6201-1987