 |
| Machine specifications |
| item |
TC-R2A |
| 10,000min-1spec. |
16,000min-1spec. |
| CNC unit model |
CNC-A00 |
| Travels |
X axis
[mm] |
420 |
Y axis
[mm] |
320 |
Z axis
[mm] |
270 |
Distance between table top and spindle nose end
[kg] |
180 - 450 |
| Table |
Work area
[mm] |
500 x 300 |
Max. load weight (uniform load)
[kg] |
80 (one side) |
| Spindle |
Spindle speed
[min-1] |
10 - 10,000 |
16 - 16,000 |
Spindle speed when tapping
[min-1] |
Max.6,000 |
| Spindle taper hole |
7/24 Taper No. 30 |
| Feed rate |
Rapid traverse rate (X x Y x Z)
[mm/mim] |
30 x 30 x 50 |
Cutting feed rate
[mm/mim] |
1 - 10,000 (X, Y)
1 - 20,000 (Z) |
| ATC |
Tool shank type |
MAS.BT30 |
| Pull stud type |
MAS.P30T-2 |
Tool storage capacity
[pcs.] |
14 |
Distance from taper gauge line (Max. diameter)
[mm(inch)] |
0 - 30 / D 46
30 - 160 / D 80
160 - 200 / D 40 |
Max. tool weight*1
[kg] |
3.0 (Total weight 25) |
| Tool selection |
Random shortcut method |
| Tool change time |
Tool to Tool
[s] |
1.1 |
Chip to Chip
[s] |
1.8 |
| Motors |
Spindle motor (continuous for 10 minutes)*2
[kW] |
7.3 / 5.0 |
8.4 / 3.65 |
Feed shaft motor
[kW] |
0.98 (X, Y) / 1.2 (Z) |
| Power source |
Power supply |
200 VAC ±10%, 50 / 60Hz ±1Hz |
Capacity (Max.)
[kVA] |
90 (20) |
| Air supply |
Working air Pressure
[MPa] |
0.4 - 0.6 |
Flow rate
[L/min] |
90 (air pressure) |
| Machine dimensions |
Height
[mm] |
2,510 |
| Required floor space (With control unit door opened) |
1,460mm×3,130mm |
Weight (including control box and splash guard)
[kg] |
2,900 |
| Accuracy*3 |
Positioning accuracy
[mm] |
0.005 / 300 |
Repeatability
[mm] |
±0.003 |
| Standard accessories |
1 operating manual, 4 anchor bolts, 4 leveling plates,
1 splash guard with manual door, 1 set of fuses. |
- * 1 Actual tool weight varies according to the configuration and center of gravity; the figuress shown here are for referrence only.
- * 2 Spindle motor output differs depending on the spindle speed.
- * 3 Measured in compliace with JIS B6201-1987
|
Page Up
| Quick table specifications (two-surface pallet changer) |
| Type |
0°/180°turntable system |
table dimensions
[mm(inch)] |
840 x 500 (33.1 x 19.7) |
Maximum turning diameter
[mm(inch)] |
φ940 (φ37) |
Table work area size
[mm(inch)] |
500 x 300 (19.7 x 11.8) (two surface) |
Maximum loading capacity
[kg(lbs)] |
80 (176) (one side) : unform load |
Rated table load inertia for turning axis
[kg m2] |
6.75 (one side) |
| Table top configuration (two sides) |
Xaxis 12H8 3 T slots, pitch 100
Yaxis 12H8 1 keyway, center |
| Table turning system |
AC servo motor (720W)
HRH gear (total speed reduction raito: 1/90) |
| Table positioning time |
2.8sec. / 180° |
Table change repeatabilty
[mm(inch)] |
0.01 (0.0004) (table center on each side (in the X, Y, and Z axis directions 230 from the center of rotation)) |
Page Up
| NC specification |
| CNC Model |
CNC-A00 |
| Control axes |
5axes (X, Y, Z, A, B) |
| Simultaneously controlled axes |
Positioning |
5 axes (X, Y, Z, A, B) |
| Interpolation |
- Linear : 3 axes (X, Y, Z) (Compensation of diameter for X and Y planes)
- Circular : 2 axes (X-Y, X-Z, Y-Z (X - Y only for diameter compensation))
- Additional axes : (s of axis X, Y, Z (No compensation of diameter) and either axis A or B)
- Thread milling : 3 axes (X, Y, Z) option
|
| Least input increment |
0.001 mm, 0.0001 inch, 0.001 deg. |
| Max. programmable dimension |
± 9999.999mm |
| >Display |
10.4-type monochrome LCD display |
| Program capacity |
Approx 200m : Both Gcode and Convorsational available
Approx 850m : Only one language available (optional) |
| External communication function |
RS232C 1ch |
| No.of registrable programs |
256 |
| NC function |
- Absolute/incremental
- Inch/metric
- Corner C / Corner R
- Coordinate rotation
- Synchronized tap
- Coordinate system setting
- Dry run
- Restart
- Backlash compensation
- Pitch error compensation
- Rapid traverse override
- Cutting feed override
- Alarm history
- Machine lock
- Computer remote
- High-accuracy mode
- Tool length measurement
- Tool life management / spare tool
- Background editing
- Subprogram
- Expanded workpiece coordinate system (NC)
- Variable operation function (NC)
|
- Program compensation input (NC)
- Tool length compensation (NC)
- Tool diameter compensation (NC)
- Operation program (conv.)
- Schedule program (conv.)
- Automatic tool selection (conv.)
- Automatic cutting condition setting (conv.)
- Automatic tool length compensation amount setting (conv.)
- Automatic tool diameter compensation amount setting (conv.)
- Automatic calculation of unknown number input (conv.)
- Machining order control(conv.)
- Macro function(system variables)(NC)
- Automatic power off
- Servomotor off standby mode
- Chip shower off display
- Automatic coolant off
- Automatic work light off
- Automatic corner deceleration
- Local coordinate system (NC)
- One-way positioning(NC)
- Operation in tape mode(NC)
|
|
- * Functions with (NC) and (conv.) are available only for NC language programming and conversational programming respectively.
|
Please ask about an option. |
|
