BRAdmin Light Image
 Index 

Network Settings
You can change TCP/IP settings of the device.

Boot Method:
You can select the method for getting IP address of the device.
If you enable the APIPA check box, the device will use an APIPA generated IP address ( 169.254.1.0 ~ 169.254.254.255 ) if a DHCP or other server capable of assigning automatic IP addresses is unavailable.
The network device will get an IP address when the device is restarted or powered-on.


IP Address/Subnet Mask:
If you wish to use static IP address for the device, select "STATIC" in Boot Method, and enter the IP address you wish to assign to the device (if necessary, check with your network administrator for the IP address to use).


Gateway:
If you are using a gateway (router), enter its address here (if necessary, check with your network administrator for the gateway IP address to use).


About unconfigued device
If your network is unable to assign IP addresses, the device may be shown as unconfigured because device could not get an IP address.
In this case, please change boot method to "STATIC", and enter an IP address, subnet mask, and gateway (if necessary, check with your network administrator for the settings to use).